Dalsa Falcon 1.4M100 HG Monochrome, Руководство пользователя

Страница: 35 / 95

Falcon XDR and HG Series Camera User's Manual DALSA
Serial Interface: How to Control the Camera 35
Serial Command: clm
Purpose Sets the camera’s Camera Link configuration, number of
Camera Link taps and data bit depth.
Syntax: •
clm m
Syntax Elements: •
m
Output mode to use:
2
: Base configuration, 2 taps, 8 bit output
3
: Base configuration, 2 taps, 10 bit output
Notes:
ƒ
To retrieve the current Camera Link mode, use the
command
gcp
ƒ
For details on line times and frame readout times when
using a window of interest, refer to following table.
Example: •
clm 3
3.6.2 Setting the Camera’s Pixel Rate
Serial Command: sot
Purpose: Sets the camera’s pixel rate.
Syntax: •
sot m
Syntax Elements: •
m
80 : 40 MHz pixel rate with a total throughput of 80 MHz
160 : 80 MHz pixel rate with a total throughput of 160
MHz
Notes:
ƒ
To retrieve the current pixel rate, use the command
gcp
or
get sot .
ƒ
The Falcon 1M120 and Falcon VGA300 cameras only
support an 80MHz output pixel rate (sot 160)
.
Example: •
sot 80