Dalsa C1240 Скачать руководство пользователя

Страница: 279 / 327

Nano Series GigE Vision Camera

Technical Specifications

•

269

Models M/C810

Copies of the Declarations of Conformity documents are available on the product page on the

Teledyne DALSA website

or by request.

FCC Statement of Conformance

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following

conditions:

The product may not cause harmful interference; and

The product must accept any interference received, including interference that may cause

undesired operation.

FCC Class A Product

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

This equipment is intended to be a component of a larger industrial system.

CE Declaration of Conformity

Teledyne DALSA declares that this product complies with applicable standards and regulations.

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

This product is intended to be a component of a larger system and must be installed as per

instructions to ensure compliance.

Содержание C1240








































































































































































































































































































































Результаты поиска

Содержание C1240

Отзывы:

Похожие инструкции для C1240

Бренды по названию

Популярные бренды

Dalsa C1240, Руководство пользователя

Результаты поиска

Содержание C1240

Отзывы:

Похожие инструкции для C1240

Бренды по названию

Популярные бренды