7.2.2 Error codes
If an alarm occurs (drained batteries, closed Stausafe, motor error, sensor error), the acoustic signal and potential-free contact will by activated
cyclically.
Confirming the error message
Operating the button will confirm and deactivate the acoustic signal and potential-free contact. However, the visual display remains until the error has
been eliminated. If a new error occurs at a later time, the acoustic signal and potential-free contact will be activated again.
Signal LED
Power
Battery
Closed
Closed
Diagnosis
230 V supply OK.
230 V supply not OK.
Battery state of charge OK.
Battery state of charge not OK.
Battery state of charge not OK, no emergency power supply
Motor in motion
The end position of the system has been reached
Measure
Check the power and power plug
Replace the battery
Replace the battery
Finish the leak check / eliminate backwater
green flash
no LED
green flash
yellow flash
red flash
yellow illuminated
yellow flash
Criterion
Battery operation in the event of a power failure
Potential-free contact
Operating temperature
* Control unit
* Sensor
protection type
* Control
* Backwater closure housing
Water level query cycle
Power operation query cycle
Battery query cycle
Motor query cycle
Sensor query cycle
Indicator
max. 4 days
230V AC max. 0,5A
0°C to +40°C
-3°C to +40°C
IP 64 / IP 54 with removed water protection plug (10)
IP 67
permanent
permanent
every 25 seconds
with initialization, function check and maintenance mode
permanent
8. Technical specifications
8.1 Stausafe control
8.2 Cable extension
Conductor cross-section
2
3 x 1,5 mm
2
3 x 2 mm
2
3 x 2,5 mm
Ext 6 m
43 m (+6 m)
56 m (+ 6 m)
71 m (+ 6 m)
Maximum cable length
49 m
62 m
77 m
7. Operation
- 21 -
