18
Dallmeier electronic
PView Station PVS IV
8 Maintenance
Changing the filter mat and possibly occasional cleaning of the housing are the only main
-
tenance work that you have to carry out at your system.
8.1
Changing the filter mat
A filter mat is positioned behind the front panel in front of the intake fan. This filter mat pre
-
vents dirt particles in the ambient air from entering the unit.
A strongly soiled filter mat can impair the cooling air supply. This can lead to a system failure
due to overheating.
IMPORTANT
Change the filter mat regularly, at the latest when it is gray.
The frequency of filter changes is dependent upon the installa
-
tion site and the degree of soiling associated with it. In normal
office rooms, checking every three months is generally suffici
-
ent, while a monthly check would be recommended for rooms
with large amounts of dust (storage etc.).
Filter mat change procedure
The device should be switched off (replacement is possible while in operation, however).
Ø
Open the front panel on the left side of the recorder.
Ø
Remove the soiled filter mat.
Ø
Remove lint/dust from the mesh with a dry cloth if necessary.
Ø
Insert a new filter mat.
Ø
Close the panel.
8.2
Cleaning
If the housing of your system is soiled, use a dry cleaning cloth to clean it.
IMPORTANT
Do not use cleansing agents or detergents.
Some cleansing agents and detergents contain solvents that
can damage the surface of your system.
