Only use the unit if it is technically in proper working condition and for the intended purpose while keeping safety and potential
dangers in mind.
Qualified Personnel
The installation, mounting, connection, commissioning and configuration of the unit may only be carried out by qualified
personnel. This also applies to the maintenance, testing and repair, whereat the regulations of the DIN VDE 0701 series of
standards (repair, modification and inspection of electrical appliances) must be followed.
Regulations
The use of video and audio surveillance systems is, in general, strictly regulated. Inform yourself about the currently valid
laws and regulations regarding data, worker and environmental protection before using the unit and ensure compliance with
them.
System Components
Only use internal components that have been tested and approved by Dallmeier. Inappropriate internal components can
cause malfunctions, damages and data loss and can result in the loss of warranty.
Modifications
Do not make any modifications to the hardware or software that has not been tested and approved by Dallmeier.
Inappropriate modifications can cause malfunctions, damages and data loss and can result in the loss of warranty.
Documentation
Read the documents included in the delivery carefully and thoroughly. Always observe the contained instructions, notes and
warnings.
Condensation Water
If the unit is brought from a cold to a warm environment, resulting condensation water can cause malfunctions and damages.
In this case, wait (up to 8 hours) until the unit has reached room temperature before commissioning.
Earthing & Equipotential Bonding
For the safety of persons (protection against dangerous contact voltages) and devices (protection against overvoltages) and
the immunity of information and communication technology equipment to electromagnetic interferences (EMI), all protec-
tive measures, which are specified by the currently valid DIN, VDE and ISO standards and which provide for a standard-com-
pliant earthing and a correct equipotential bonding of electrical and electronic devices, are mandatory and must be fulfilled
by all means.
Lightning Storms
To avoid damage to the unit by electrical surge during lightning storms, unplug the unit from the mains power supply (pull
out the power plug). This is also recommended, when the unit has been unused for a long period of time.
Operating Conditions
Unfavourable operating conditions can shorten the life of the unit and can cause malfunctions, damages and data loss and
can result in the loss of warranty. Observe the specifications given in the technical data, the operating condition requirements
and the maintenance instructions.
Shocks
Shocks can cause malfunctions and damages. The unit may not be moved while in operation.
Foreign Bodies
If objects or liquids get into the unit, immediately disconnect it from the power supply (pull out the power plug).
Contact the sales partner responsible for your area.
Burnt Smell
If you notice burnt smell or a formation of smoke coming from the unit, immediately disconnect it from the power supply
(pull out the power plug). Contact the sales partner responsible for your area.
Opening
The housing of the unit may only be opened by qualified personnel for commissioning, inspection, maintenance and repair.
Disposal
Do not dispose waste electrical and electronic equipment into the household trash. Disconnect the unit from the power sup-
ply. Remove all connected devices. Return the unit to your respective sales partner.
Safety Instructions
3
H
DD Moun
ting
Moun
ting
Saf
ety
Requir
emen
ts
DL
S 1600
Local L
ogin
Dimensions
D
M
S 2400
Remote L
ogin
Indica
tors
