Commissioning and Remote Login
13
Commissioning
►
Connect the device to the network.
►
Connect the device and relevant peripherals to the voltage supply.
►
Switch on the peripherals and the device.
The device is available for remote configuration via Ethernet after the start is complete (up to approx. 5 minutes).
The IP address of the device (default 192.168.2.230) can be changed without login using the software
PService
or
IP-Finder.
►
Observe the appropriate Configuration documentation.
►
Enter 192.168.2.230 as
IP address (Host)
.
►
Click the
Connect
button.
The connection will be established.
Device information is displayed.
The password input field is displayed.
Login
In the initial state it is possible to login remote using the serial number as password. The rights of the Administrator group
are valid.
Note that the definition of the passwords and of the network parameters are necessary for remote access
(SMAVIA Viewing Client).
►
Observe the NetConfig documentation Installation and Commissioning.
►
Start the software NetConfig.
►
Enter the serial number (e.g. DAX2-12345678) as
Password
.
►
Confirm with
Login
.
The configuration interface is displayed.
The configuration interface is compressed for slow network connections before transmission if the
Slow Network
check-box is
activated.
H
DD Moun
ting
Moun
ting
Saf
ety
Requir
emen
ts
DL
S 1600
Local L
ogin
Dimensions
D
M
S 2400
Remote L
ogin
Indica
tors
