21
COMMISSIONING – DDZ5000HD-DN/IR Series | REV. 1.0.1 | © 2019 Dallmeier
8 Maintenance, Inspection and Cleaning
Maintenance and Inspection of the Device
Maintenance and inspection of the device may only be carried out by quali-
fied personnel in compliance with the regulations of the DIN VDE 0701-0702
series of standards (VDE 0701-0702: “Inspection after repair, modification of
electrical appliances – Periodic inspection on electrical appliances – General
requirements for electrical safety”).
Cleaning the Device
If it is necessary to clean the device, observe the following notes:
NOTICE
Damage to the surfaces of the device due to improper cleaning practices
➡
Clean the outside of the housing with a clean, soft, dry and antistatic
cloth.
•
Do not use detergents.
•
Do not use microfiber cleaning cloths.
➡
Clean the polycarbonate lens protection front window of the
DDZ5
(2)
36HD-DN/IR with water and some hand dishwashing liquid
using a clean, soft and non-linting cloth or sponge.
•
Do not rub the polycarbonate lens protection front window with a
dry cloth.
•
Do not use common glass cleaners.
•
Do not use microfiber cleaning cloths.
•
Avoid excessive rubbing.
•
To dry the polycarbonate lens protection front window, dab it
carefully and gently with a clean, soft, dry and antistatic cloth
(e.g. a glasses cleaning cloth) to avoid scratching the surface.
The lens protection front window of the DDZ5
(4)
36HD-DN/IR is made of
glass, so you can use a common glass cleaner for cleaning if required.
Содержание DDZ5000HD-DN/IR Series
