DAS-4 Eco
www.dallmeier.com
18
Correct Interchangeable Drawer Unit
It is essential that you ensure that you insert the HDD drawer unit back into the original
interchangeable drawer unit. If you install it in another interchangeable drawer unit all the
data and pictures may be lost and a full new installation procedure may be required.
Contact the Dallmeier Support Team if you are in any doubt.
9.2
Localization of the HDD
In the event of a hard disk drive defect, you can fnd the hard disk drive that must be repla-
ced using the SMAVIA Viewing Client GUI.
¾
Open the
Info
dialogue via
Setup
>
System
>
Info
>
HDD status
.
Fig. 9-1
The defective HDD is displayed in red.
9.3
HDD Replacement
NOTE
Risk of data loss and/or damage to the HDD module.
Before removing the HDD, ensure that both device and DAS-4 Eco are de-
energized.
NOTE
Damage to components at risk from electrostatic discharge caused by tou-
ching them.
Ensure that you are electrostatically discharged (earthed) before you touch
the module.
Wear suitable ESD shoes or an earth strap.