DAS-4 Eco
www.dallmeier.com
12
6 Connection and Start-up
NOTE
No recording to the external storage system DAS-4 Eco.
The DAS-4 Eco is not hot-pluggable. The DMS/DLS must be turned off
before connecting the DAS-4 Eco.
6.1
Connection and Start-up without External Power Supply Unit
Connection
¾
Shut down the DMS/DLS.
¾
Turn off the DMS/DLS.
¾
Disconnect the DMS/DLS from the power supply (pull out the power plug).
¾
Connect the DAS-4 Eco to the DMS/DLS by means of the SATA cable.
¾
Connect the DAS-4 Eco to the DMS/DLS by means of the power supply cable.
Fig. 6-1 SMAVIA appliance DLS 1600
Fig. 6-2 SMAVIA appliance DMS 2400
Commissioning
¾
Reconnect the DMS/DLS to the power supply.
¾
Turn on the DMS/DLS.
The status LEDs of the DAS-4 Eco will be lit (blue).
After the initialization and boot process of the recorder has been completed the DAS-4
Ecois ready for use.