DAS-300 E
28
Dallmeier electronic
9.4
Replacing the I/O module
The I/O module is not hot-pluggable. Turn off the recorder and the DAS-300 E before
replacing the I/O module.
9.4.1
Removing the I/O module
1. Turn off the recorder.
2. Disconnect both power packs of the DAS-300 E
from the power supply.
3. Using two hands, grasp each handle between the
thumb and forefinger of each hand. Squeeze
thumb and forefinger together to release the
handles. Pull the handles outward.
4. Carefully remove the I/O module using two hands.
IMPORTANT
Possible damage to the I/O module and / or sub-rack!
Ensure that you slide it straight. Do not use any force.
Fig. 9-10
Fig. 9-11