21
Dallmeier electronic
DDF3000A4-DN / DDF3000A4-D
ID Position
allows you to position the ID in the video image.
ID Display
allows you to activate/deactivate the display of the
ID on the monitor.
8�2�2
CCTV System
q
Setting the video standard
Ø
Choose between
PAL
and
NTSC
to define the video
signal.
The PAL and NTSC submenus allow the following settings to be made:
l
Video level
After selecting the video signal you can adjust the video
level, if necessary.
l
Synchronization
Ø
Choose between
Internal 1
,
Internal 2
,
AC-Linelock
and
Flickerfree Linelock
for
Sync
.
NOTE
The
Sync
=
AC-Linelock
function is not supported when ope-
rating the camera at 12V DC.
NOTE
Flickerfree Linelock
is recommended if cameras without Li-
nelock that are operated with a mains frequency of 50 Hz must
be enhanced for scenarios with neon tubes.
l
V-Phase
After selecting the video level and synchronization you can adjust the
V-Phase
, if ne-
cessary.
NOTE
The
V-Phase
function is not supported when operating the
camera at 12V DC.
---------- Basic Functions ---------
Previous Page.
Camera ID.
>
CCTV System
< PAL�� >
Horizontal Flip
Off
Lens Select..
DC
Color
On
Day / Night Setup..
----------------- PAL -----------------
Previous Page.
V-Level
100
>
Sync:
< Internal 1 >
V-Phase
72
----------------- NTSC ----------------
Previous Page.
V-Level
100
>
Sync:
< Internal 1 >
V-Phase
72
------------- Camera ID -------------
Previous Page.
>
Camera ID:
12345678
ID Position
Up-Left
ID Display
Off
