12
attribute box. Press four navigation keys to move the spot location.
In line temperature measurement editing mode (activated immediately
after adding a line or by selecting via the
A
key), press the
Menu
key to pop up
the attribute box. If measurement line is horizontal, press
Up
and
Down
keys
to move the line location; press
Left
and
Right
keys to move the reference line.
If measurement line is vertical, press
Left
and
Right
keys to move the line;
press
Up
and
Down
keys to move the reference line.
In area measurement editing mode (activated immediately after adding an
area or by selecting via the
A
key), press the
Confirm
key to pop up the
attribute box. Select in the attribute box the parameter to be edited, either size
or position. Press the four navigation keys to move the area location or change
the size of the area.
[6] Trigger/Shortcut key
The trigger key serves as a shortcut to access the following functions:
Laser – Pulling trigger activates laser sight and releasing deactivates it.
Spot, Area– Pulling and releasing trigger adds a spot or area. Pulling and
releasing trigger again removes the spot or area.
Video and Image Save –pressing to initiate a Save cycle.
Zoom-pressing to zoom the infrared image
LCD brightness adjustment-pressing to activate
[7] Microphone
Used for recording a voice message with the Saved image
