LT3-P/LT7-P Thermal Image Camera User Manual
DALI
36
4.5.3
Save Setting
The Save Setting menu allows enable/disable of the CCD Camera and voice
recording. Press
Confirm
key to activate the main menu. Select
File->Save
Setting
, press
Confirm
key to display the Save Setting dialog box. Press
Up
and
Down
keys to choose the option. Press
Left
and
Right
keys to set On or
Off.
Link Save
- With Link Save “On”, the imager will always save an IR image
and a CCD image with every save operation. With Link Save “off”, the imager
will only save whichever image the camera is viewing at the time of the save.
!
NOTE:
When Imager is in the visible camera mode, thermal detector
calibration does not occur and may result in lower accuracy images when
saved. Always save thermal images with thermal camera active, when Link
Save is ON.
!
NOTE
：
When Imager is in Link Save Mode, a prompt “Please do now move
when in link save CCD image previewing” will pop up. Then thermal image is
switched to CCD image, user confirm two images whether consistent. After
confirm Save, thermal image is back again.
Voice Save
– With Voice Save “On”, the imager will start the voice record
cycle after confirmation of the save image. No recording will occur with Voice
Save set to “Off”. Voice save setting is ignored with the Auto Save function.
!
NOTE:
To add voice comment to an image, enable Voice Save, open the
image to be modified and select File>Save. The imager will prompt you to
record the message and the new image will be assigned a new image number
while the old image will remain unchanged.
