LT3-P/LT7-P Thermal Image Camera User Manual
DALI
2
!
Warnings, Cautions and Notes
Definitions
WARNING
Could cause bodily injury or death.
CAUTION
Could cause damage to equipment or permanent loss of data.
NOTE
provides useful information to the operator.
Important Information
– Read before using the Instrument
WARNING
– Laser Radiation is emitted from this device.
Do Not
stare
into Laser Beam.
Class 2 Laser, 635 nm, 0.9mW
CAUTION
- Never point the lens directly toward a strong radiation source
(ie. Sun, direct or reflected laser beam, etc ), with power on or power off, as
damage may result to the thermal detector used inside.
Permanent
damage may result!
CAUTION -
The original shipping carton should be kept for use for future
transportation. Do not drop, shake or impact the thermal imager
excessively, in use or during transportation.
CAUTION -
Store the unit in its original case in a cool, dry, well-ventilated
area away from strong electromagnetic fields.
CAUTION -
Protect the surface of the lens from being stained or damaged
by foreign objects such as sludge or chemicals. Please replace the lens cap
after use.
CAUTION -
Please remember to backup image data regularly to avoid
losing important data.
NOTE
- For maximum measurement accuracy, allow 3 to 5 minutes for
camera to stabilize after initial power up.
NOTE
- Each camera is factory calibrated. It is recommended that
calibration be performed every 12 months.
