13
12
Painting the Loudspeaker (optional)
Painting the loudspeaker requires great care and attention and should
only be done by a qualified professional
The loudspeaker’s frame and front grille can be painted in colours to match your
home decor. We recommend spray paint.
It is extremely important for the loudspeaker’s performance that no paint touches
the drive units. Therefore, it is necessary to cover the black front and the drive
units with the enclosed protective template before painting.
NOTE: When painting the loudspeaker, do not remove the drive units and the
switch. The front grille should be removed from the loudspeaker before painting.
Before painting the front grille, remove the logo
badge. After painting, it can be replaced with
the new logo badge enclosed with the loud-
speaker.
The protective template must be carefully posi-
tioned, because the drive units are very sensitive
and can be damaged by even the slightest pres-
sure. When the frame has been painted and the
paint is dry, remove the template. It can be used
again, if you wish to re-paint the loudspeaker
later.
The front grille must be painted only from the
front. After painting, spray its rear with com-
pressed air to remove any paint in the holes.
Dried paint can block the sound.
Maintenance
Clean the loudspeaker with a soft, dry cloth. If the cabinets are dirty, a soft cloth
wrung out in a mild household cleaning agent can be used. Be very careful when
dusting off the driver cones and domes, as they are very sensitive. The front grilles
can be vacuumed and, if necessary, wiped with a lint-free cloth wrung out nearly
dry in a mild household cleaning agent.
Enjoy!
Once again, thank you for choosing DALI. We
remind you that your authorised DALI Helicon
dealer will be glad to assist with advice on con-
necting and adjusting your new loudspeakers.
Finally, we would like to invite you to visit our
website - www.dali.dk - for more information
on DALI and the technology behind the Helicon
series.
