DALBO MAXICUT 920, Руководство пользователя, Страница: 26 / 49

MAXICUT
Page 26
Grass drums
There is an option to equip the machine with smooth steel drums (grass drums) as extra
equipment so that one can switch between a knife drum and a grass drum. These can be used
for care of grass areas and regular rolling on areas in which there is no risk of soil/sand ero-
sion.
Fig. 12
Power
When the machine is fitted with grass drums, the power decreases the need relative to the
standard machine. This is because the smooth drums are easier to pull and the forward speed
is lower.
The power requirement is very dependent on the type of soil and terrain as well as the speed.
Guiding power requirement [ hp ] (without levelling)
Model MAXICUT 920 with Grass drums
Power requirement in [ HP ]
190 – 220
Driving and operating
Once the grass drums are installed, it is recommended that the machine be driven at 6 – 10 km/h,
but driving should always be done according to conditions.
Operation of the ground machine does not change when installing smooth drums (see driving
and operating).