DALBO MAXICUT 920, Руководство пользователя, Страница: 12 / 49

MAXICUT
Page 12
Description of the machine
MAXICUT is a powerful, knife-drum, designed specifically to drive through crops with long,
strong stems. Here the remaining organic residue is cut so that the decay starts faster. The
drums are designed as watertight containers, which can be filled with water as needed to
increase the machine's weight.
The machine is delivered from the factory without water in the containers.
Fig. 1
The knife drums are constructed so that
the individual sections can move inde-
pendently of each other, while being sus-
pended like a pendulum.
Hydraulic weight distribution is installed
on the machine so the pressure will be
the same over the entire working width.
By default, there are strong bearings.
MAXICUT 920 in work mode
MAXICUT's intended purpose is harvesting, for example, corn, sunflower or rape seed. The ma-
chine's total weight and the nature of the soil play a large part here. The machine is most
effective when the knife-drum is completely filled with water and the soil is completely dry.

The containers must not be filled with water or a liquid with a density less than
1.15 g/cm³. This avoids overloading the machine's hydraulic and welded frames.
The speed of the machine must be high to be effective, with speeds over 15 km/hour, prefer-
ably 15
– 20 km/hour where one will find the knife-drums at their best across the stubble and
plant remains. Run over the field twice if you wish to do any further work on the field.

The machine is constructed so sturdily that it can tolerate high loads. Neverthe-
less, it is always necessary to adjust the driving speed to the conditions, i.e. re-
duce driving speed, for example, when the ground is uneven.