DALBO MAXICUT 260 Series, Руководство пользователя

Страница: 14 / 32

MAXICUT
Page 14
Connecting and disconnecting
Connecting
Fig.2
MAXICUT is connected to the tractor's
lift arms and is secured with ball
joints and splitters (A)
Remember to secure the connection with ball joints and linchpins.
Hydraulics
As a standard, MAXICUT 400 requires a double-acting hydraulic cylinder, which is then
put on a forklift, to transport the machine form one field to another.
Table 1. Hose markings
Cylinder name Colour Outlet Function
Wheel frame cylinder Yellow Double-acting Lift the MAXICUT up on the wheels
while in working mode.
The hydraulic system is equipped with pilot-operated check valves. This results in a
supply of pressure in one of the hoses to enable the cylinders to move. The cylinders,
therefore, do not move if the tractor's lever is shifted to the on position.
Furthermore, it is not possible to lower the wheel frame if the tractor's motor is
switched off.
Disconnecting
Make sure the hydraulic hoses have not been crushed.
Always disconnect the machine on a flat surface to ensure maximum stability.
A