DALBO CULTIMAX 650, Руководство пользователя

Страница: 22 / 26

CULTIMAX
Side 22
After mounting the cylinder, activate the wing fold cylinders until the piston rods
begin to move in the cylinders. Next, activate the cylinders in the opposite direc-
tion until the cylinder is back in the starting position. Move the cylinders several
times in this way.
Never allow bystanders within the operating radius of the implement.
Replacing Cylinder for Wheel Chassis
Repair the CULTIMAX unfolded and resting on the ground.
Fig. 14
5. Relieve the pressure in the cylin-
ders. Disconnect the hoses.
6. Remove the split pins and the oth-
er pins. The cylinders are now free.
7. Install new and repaired cylinders.
Remember to make sure, that the
pin is engaged in the stop and that
the pins are secured with split
pins.
8. Connect the hoses. After connec-
tion, make sure that there is no
danger of the hoses becoming
ripped off or pinched.
When mounted activate the cylinders until the piston rods begin to move in the
cylinders. Then activate the cylinders in the opposite direction until they are back
in starting position. Move the cylinders a few times in this way.
Replacing Cylinder for Crackerboard
Repair the CULTIMAX unfolded and resting on the ground.