DALBO CULTIMAX 650, Руководство пользователя

Страница: 21 / 26

CULTIMAX
Side 21
Replacements and Repairs
 Safety is important in connection with all repair work on the CULTIMAX. The follow-
ing safety precautions and the precautions listed in the beginning of this manual
must be observed.
Before performing any adjustments, maintenance or repairs on the machinery,
always unfold the CULTIMAX, and lower the implement to the ground or secure in
transport position, engage the tractor brakes, turn off the engine and remove the
ignition key, to avoid unintentional operation.
Pay careful attention to safety, when performing repair work on the hydraulic sys-
tem. Remove hydraulic pressure, prior to doing any maintenance.
 After replacing a cylinder, always fill up the cylinder with oil, before putting load on.
It is recommended, that the cylinder is first mounted in the solid part on the frame.
Then the hydraulic hoses is mounted and the cylinder is filled up with oil, after which
the other part is mounted.
After making repairs to the hydraulic system, always bleed air out of the system
before operating the CULTIMAX, to avoid any possible personal injury, or mechani-
cal breakdown or damage.
Hydraulic System
Changing Wing Fold Cylinders
When performing repairs, make sure the CULTIMAX is unfolded and resting on the
ground.
Fig. 13
1. Relieve the pressure in the cylin-
ders. Disconnect the hoses.
2. Remove the split pins and the oth-
er pins. The cylinders are now free.
3. Install new and repaired cylinders.
Remember to make sure, that the
pin is engaged in the stop and that
the pins are secured with split
pins.
4. Connect the hoses. After connec-
tion, make sure that there is no
danger of the hoses becoming
ripped off or pinched.