Daktronics Tuff Sport TN-2560, Руководство по установке

Страница: 11 / 42

Electrical Installation
7
Each self-test pattern will vary depending on the model, the number of drivers, and types
of digits. Figure 7 shows an example of the LED bar test pattern that each digit performs.
Figure 7: Digit Segment POST
Radio Settings
Reference Drawings:
System Riser; Tennis; Single Court w/ TNMC, AS 5000 ..................................... DWG-177098
System Riser; Tennis; Indoor/Outdoor Single Court, RC-100 ........................... DWG-252412
System Riser; Indoor/Outdoor Single Court, RC-200 ..................................... DWG-3640312
Tennis scoreboards display radio settings during the POST in certain digits depending on
the scoreboard model and controller type, as shown in Figure 8 .
• If an RC-100 base station installed, “CXX” will display, where the XX is a channel from
01-15. The default is channel 01. Refer to DWG-252412 in Appendix A .
• If an RC-200 base station is installed, “bXCY” will display, where X is the broadcast
setting and Y is the channel setting. The default is b1C1. Refer to DWG-3640312 in
Appendix A .
• If an All Sport radio receiver is installed (for use with TNMCs), “bXCY” will display,
where X is the broadcast setting and Y is the channel setting. The default is b1C1.
Refer to DWG-177098 in Appendix A .
These values must match the settings in the control console. Refer to the appropriate
control console manual listed in Display Controllers (p� 2) .
Note: For scoreboards that only display team score (and do not include a Time of Day
clock), the radio settings are not visible.
COURT 1
HOME
GUEST
daktronics
COURT 1
HOME
GUEST
daktronics
COURT 1
HOME
GUEST
daktronics
COURT 1
HOME
GUEST
daktronics
RC-100 Radio Settings
RC-200/All Sport
Radio Settings
Figure 8: Radio Settings