Daktronics PC-2002, Руководство пользователя

Страница: 7 / 34

Mechanical Installation
3
2 Mechanical Installation
This section describes the mounting details of the PC-2002. Daktronics is not responsible
for mounting the display. The customer is responsible for providing mounting anchors/
screws. A qualified engineer must specify the mounting anchor type according to
national and local building codes.
Note: Daktronics assumes no liability for any installation derived from the information
provided in this manual or installations designed and installed by others.
The PC-2002 can mount directly to the wall surface using top and bottom mounting
brackets. These brackets then attach to the wall with four anchors. Refer to Figure 4 .
3/16" – 1/4" Anchors
(not provided)
9.7" 9.7"
12.0"
Wall
Surface
Side View Front View
Figure 4: Surface Mounting Installation
Note: Due to the variety of wall materials used in sports facilities, Daktronics cannot
anticipate every user’s installation needs or provide mounting hardware suitable
for every installation. Choose a method of installation that will safely support the
display’s weight.
Attach the brackets to the top and bottom of the display. Level the display against the
mounting surface and make a mark through the anchor holes on the bracket with a
marker or heavy pencil. Drill holes in the wall and install anchors at the marked locations.
Minimum steel anchor size is 3/16" diameter (4.7 mm).