Daktronics MS-2113, Руководство пользователя

Страница: 9 / 50

Mechanical Installation
5
There are three height-adjustment holes in the mounting tubes on the sides of the display.
Raise the display for viewing by removing the pins and retaining clips, sliding the display
upward on the T-stands and reinserting the pins in the appropriate holes. Lower the
display for storage or transportation. It may be helpful to have one person lift the display
while another person adjusts the locking pins.
Optional Equipment Installation
Reference Drawings:
Ad Panel Installation, MS-2113 ........................................................................ DWG-3274569
Caption Options, MS-2113 ............................................................................... DWG-3274719
Cover Installation, MS-2113 ............................................................................. DWG-3274720
Ad Panel
A custom advertising/school logo panel may be added to the MS-2113. Threaded inserts
in the top of the cabinet allow attachment using only three screws. The 12" H x 52" W
(305 mm, 1.32 m) aluminum panel runs the full width of the scoreboard. DWG-3274569 in
Appendix A illustrates the ad panel installation.
Caption Kits
The MS-2113 is shipped as a generic multisport scoreboard with a standard clock/score
caption arrangement. The face of the scoreboard displays game time, home and guest
scoring, and period. Four optional caption kits give the scoreboard added versatility:
• Custom Team Names
• Baseball/Softball Mode
• Segment Timing Mode
• Volleyball Mode
The aluminum caption panels are applied to the scoreboard face with hook-and-loop
fastener strips. They can be removed and replaced for various events, leaving the hook
strips attached to the face of the scoreboard. Refer to DWG-3274719 in Appendix A for
an illustration of the various caption configurations.
Scoreboard Cover
The aluminum cover protects the MS-2113 during transportation and storage. Flanges
on the cover fit into slots on either side of the scoreboard, and the cover simply slides
into place using handles on the front. DWG-3274720 in Appendix A illustrates the cover
installation.
Note: If a radio antenna is installed on the face of the scoreboard, remove the
antenna before installing or removing the cover. Refer to Signal (p.7) for more
information about radio installations.