Daktronics MS-2113, Руководство пользователя

Страница: 12 / 50

Electrical Operation
8
RC-200 Base Station Settings
Reference Drawings:
Base Station: Outdoor Installation .................................................................. DWG-3640913
The base station is preset to Function 2, Group 1, Channel 1. When the scoreboard is
powered on, it will briefly display the broadcast (“b1”) and channel (“C1”) numbers
in the clock digits. Ensure these numbers match the setting in the RC-200 handheld
controller. If the default settings do not appear to work, refer to DWG-3640913 for
instruction on changing the settings. Refer also to the RC-200 manual listed in Control
Console (p.2) .
RC-100 Base Station Settings (Legacy)
Reference Drawings:
Base Station: Outdoor Installation .................................................................... DWG-236394
The base station is preset to Function 5, Channel 1. When the scoreboard is powered on,
it will briefly display the base station channel number (“C 01”) in the clock digits. Ensure
the channel number matches the setting in the RC-100 handheld controller. If the default
settings do not appear to work, refer to DWG-236394 for instruction on changing the
settings. Refer also to the RC-100 manual listed in Control Console (p.2) .
Radio Receiver Settings
Reference Drawing:
Installation Drawing; Outdoor Scbd Gen VI Radio Receiver ...................... DWG-1109181
The radio receiver is preset to Broadcast Group 1, Channel 1. When the scoreboard is
powered on, it will briefly display the broadcast (“b1”) and channel (“C1”) numbers in
the clock digits. Ensure these numbers match the settings in the All Sport control console.
If the default settings do not appear to work, refer to DWG-1109181 for instruction
on changing the settings. Refer also to the All Sport manual listed in Control Console
(p.2) .
Note: If there are other All Sport controlled displays in the area operating with radio
signal, each display receiver must be set to a different channel number (typically
starting with 1 and numbering consecutively).
If the radio receiver channel and broadcast settings do match those set in the console
but the console does not control the display, there may be radio interference. In this
case, change the settings of the wireless radio receiver inside the scoreboard and in the
console as described in the radio control manuals.
For more information, refer to the
Gen VI Radio Installation Manual (DD2362277) ,
provided with the receiver unit and available online at www.daktronics.com/manuals .
MX-1 and DAK Score
Reference Drawing:
MX-1 Installation Options on MS-2113 ............................................................ DWG-4107389
For MX-1 Interface Box installation, refer to DWG-4107389 . Refer also to the MS-2113 Radio
Installation Quick Guide (DD4661729) , shipped with the scoreboard and available online
at www.daktronics.com/manuals.