Daktronics MS-2113 Скачать руководство пользователя страница 21

Страница: 21 / 50

Troubleshooting

LED Driver

Reference Drawings:

Specifications; Gyrus LED Driver, 16 Col

.........................................................

DWG-3071833

Electrical Specifications- MS-2113

..................................................................

DWG-3275249

Schematic: MS-2113 .........................................................................................

DWG-4107359

The LED driver performs the task of switching digits on and off within the display. LED

drivers are located inside of a driver enclosure. Refer to

DWG-3275249

to view the

location and components of the driver enclosure. Refer to

DWG-4107359

for detailed

wiring schematics.
When troubleshooting driver problems, four red LEDs labeled

DS1

DS2

DS5

, and

DS8

provide diagnostic information as shown in the table below.

Note:

While it is necessary to have the display powered on to check the LED indicators,

always turn off display power before servicing.

LED

Function

Operation

Summary

DS1

Radio/

RS-232 RX

Blinking

or off

DS1 will be blinking when the driver is receiving radio

signal and off when there is no signal.

DS2

Status

Blinking

DS2 will be blinking at one second intervals to indicate

the driver is running.

DS5

Signal RX

Blinking

or off

DS5 will be blinking when the driver is receiving current

loop signal and off when there is no signal.

DS8

Power

Steady on

DS8 will be on and steady to indicate driver has power.

For detailed descriptions and pin-outs of the driver jacks, refer to

DWG-3071833

Replacing a Driver

If the driver status indicators do not appear to be working correctly, it may be necessary

to replace the driver.

1�

Open the back panel as described in

Component Locations & Access (p.16)

2�

Remove the metal cover of the driver enclosure by lifting it up, then back and down

to expose the driver components.

3�

Disconnect all plugs from the driver by squeezing the locking tabs together and

pulling the connectors free. It may be helpful to label the cables to know which plug

goes to which jack when connecting the replacement driver.

4�

Remove the nuts securing the driver to the inside of the enclosure.

5�

Carefully lift the driver from the display and place it on a clean, flat surface.

6�

Position a new driver over the screws and tighten the nuts.

7�

Reconnect all plugs to their mating jacks on the driver. The connectors are keyed

and will attach in one way only. Do not force the connections.

8�

Ensure the new driver is set to the correct address. This will be the same address of the

old driver being replaced. Refer to

Setting the Driver Address (p.18)

9�

Put the metal cover back on the enclosure, securely close the back panel, and then

power up and test the display to verify the issue has been resolved.

Содержание MS-2113



















































Результаты поиска

Содержание MS-2113

Отзывы:

Похожие инструкции для MS-2113

Бренды по названию

Популярные бренды

Daktronics MS-2113, Руководство пользователя

Результаты поиска

Содержание MS-2113

Отзывы:

Похожие инструкции для MS-2113

Бренды по названию

Популярные бренды