Daktronics Galaxy AF-3165, Руководство пользователя

Страница: 8 / 85

Introduction 3
A typical display system consists of a Windows

based personal computer (PC) running Venus

1500
software and one or more displays. The displays are offered as single-face units, which are single-sided
stand-alone displays. They can become double-faced by mounting them back-to-back with a second
unit.
The Venus 1500 controller is a software package that runs under Windows 98, ME, NT

4.0 or 2000
operating systems on an IBM

-compatible computer. Refer to the Venus 1500 controller operator’s
manual for installation and operation of the Venus 1500 controller editing station.
Refer to
Sections 4.2 and 4.3 for the summaries of how signal and power are routed through the
displays.
1.5 Component Identification
The following illustrations depict some of the more commonly accessed Galaxy display components.
Because Daktronics occasionally alters standard design to meet customer needs, the actual display
design may very slightly from the illustrations below.
This is only a brief overview. Refer to
Section 4 for additional information on maintaining the various
display components.
Com Port:
A COM port is a connector on the back of the control computer. The COM port is used to
control the display network through either a 9- or a 25-pin serial connector.
Controller: The display’s controller is the “brains” of the display (refer to Figure 1 below). The
controller receives signal information from the control computer, translates it, and activates the
appropriate pixels on the display accordingly.
Figure 1: Version 3 Controller