Daktronics Galaxy AF-3165, Руководство пользователя, Страница: 11 / 85

Mechanical Installation 7
Section 2: Mechanical Installation
Notes: Daktronics does not guarantee the warranty in situations where the display is not constantly in a stable
environment.
Daktronics engineering staff must approve
any changes that may affect the weather-tightness of the display. If
any modifications are made, detailed drawings of the changes must be submitted to Daktronics for evaluation
and approval, or the warranty may be void.
Daktronics is not responsible for installations or the structural integrity of support structures done by
others.
It is the customer’s responsibility to ensure the structure and any additional hardware has been approved
by a qualified structural engineer.
2.1 Mechanical Installation Overview
Because every installation site is unique, there is no single Daktronics-approved procedure
for mounting the Galaxy displays. The information contained in this section is general
information only and may or may not be appropriate for your particular installation.
A qualified individual must make all decisions regarding the mounting of this display.
Read both the mechanical and electrical installation sections of this manual before beginning any
installation procedures.
2.2 Support Structure Design
Support structure design depends on the mounting methods, display size and weight. The structure
design is critical and should be done only by a qualified individual. Display height and wind loading
are also critical factors. It is the customer’s responsibility to ensure that the structure and mounting
hardware are adequate.
Daktronics is not responsible for the installations or the structural
integrity of support structures done by others.
It is the installer’s responsibility to ensure the mounting structure and hardware are capable of
supporting the display, and will agree with local codes.
Before beginning the installation process, verify the following:

The mounting structure will provide a straight and square-mounting frame for the display.

The mounting structure is capable of supporting the display and will not yield at any
unsupported points after mounting.

Clearance: 3" of unobstructed space is available below the display for filter removal from the
display. 1-¼" of unobstructed space is available above the top of the display to remove the
eyebolt and plug the hole properly.
Correct any deficiencies before installation.