Section 7:
DM-100 Controller
This section describes the set up and operation of the DataMaster 100 Controller. The DM-
100 may be used with either an indoor or outdoor j-box, both of which are explained in this
section. Note also the information on the DataMaster Insert.
7.1 DataMaster 100 Overview
Reference Drawing:
Address Dip Switch Settings........................................
Drawing B-256001
The DataMaster
100 Series controller, shown in
Figure 9
,
is a hand-held controller designed to operate Daktronics
LED DataMaster
displays. This lightweight controller is
encased in ABS plastic, making it a durable and
convenient control option. The console’s liquid crystal
display (LCD) guides the user through the operation of the
system.
Figure 16: DataMaster 100
The DataMaster 100, identified by the series number DM-
100, can be configured to display petroleum price, motel
rates, and time and temperature data. Refer to
Drawing B-
256001
for information on possible control options and
connection procedures.
Note:
When the carrier delivers this Daktronics order,
open the packages and inspect for shipping damage
such as rattles and dents. See that all equipment is
included as shown on the packing slip. If
deficiencies are found, immediately report them to
Daktronics. Save all packing materials in case
warranty repair or exchange is needed.
Replacement Parts List
The following is a list of possible replacement parts for the DataMaster 100
controller. When re-ordering a part, be sure to use its corresponding part number. To
obtain
a part
from
Daktronics, refer to
Description
Daktronics Part No.
Wall pack transformer
T-1118
DataMaster 100 controller
0A-1196-0088
Control Insert
LL-2551
Cable, DB-9 male to DB-9 female, 10'
W-1267
DM-100 Controller
7-1
