DM-100 Controller
29
Menu Items
Pressing the
Menu
key accesses the settings listed below:
On power up, the DM-100 LCD display defaults to showing the current display settings. The sequence
preview shows the sequence order and display formats currently selected. The following menu items are
shown on the LCD. Press the
Up
and
Down
arrows to select.
Daylight Savings Setting
Use the Daylight Savings Select menu to set the sign to automatically correct for daylight savings.
Set Time
Use the Set Time menu to set the time on the display.
1.
Daylight Savings Setting
2.
Set Time (12 hr/24 hr)
3.
Temp °F Offset
4.
Temp °C Offset
5.
Time Format/Hold Time
6.
Temp °F Format/Hold Time
7.
Temp °C Format/Hold Time
8.
Sequence Order
9.
LED Test
10.
Modem Settings
11.
Display Status
12.
Diagnostics
13.
About
LED Screen
Action
Press the Enter key to accept
Press the down arrow key to select the Enable or Disable Daylight-
saving time correction.
If enabled, the display time automatically corrects for daylight-saving
time. The default setting is daylight-saving time enabled.
Note:
For changes to take effect, the time must be updated on the
display. Use the
Set Time
menu function.
DAYLIGHT SAVINGS
ENTER TO EDIT
DAYLIGHT SAVINGS
ENABLE?
↓
LED Screen
Action
The LCD goes to the
Set Time
screen directly from changing the
daylight-saving time screen, or can be selected using the menu.
Press the
Enter/Edit
key to modify the time listed on the screen.
Note:
The flashing asterisk shows current data being edited.
The LCD displays the time followed by a blinking asterisk (*). Change
the time as needed and use the up and down arrow keys to switch
between AM and PM. The AM/PM setting is not shown when 24-hour
time is selected.
Press
Enter
to save changes when finished editing.
Press the
Clear
key to cancel changes
SET TIME - 12 HR
ENTER TO EDIT
SELECT FUNCTION
GAS PRICE
↑↓
