DAKOTA ULTRASONICS PZX-7 Скачать руководство пользователя страница 9

Страница: 9 / 51

PZX-7

Ultrasonic Multi-Mode Thickness Gauge

6) Press the

key to accept changes and return to the top level of

features, or the

key at any time to abort changes and return the

measurement screen.

2.9 The Display

The

PZX-7

uses a custom glass LCD backlit low temperature display for use in a

variety of climate conditions. It contains graphic icons, as well as both 7 and 14
segment display areas. Let’s take a closer look and what all these things are telling
us:

A. Edit:

This icon will be displayed, and blinking, to let a user know when they

are in an edit mode to change a value or setting.

B. Large 7 segment:

The thickness measurement, velocity or alpha message

will be displayed in this area.

C. Measurement Modes:

This group of icons indicates which measurement

mode the

PZX-7

is currently using. The modes are pulse-echo, echo-echo,

interface-echo, and plastics (PLAS).

D. Stability/Repeatability Indicator:

This is used in conjunction with the

thickness measurement as a reference for the validity of the measurement.
The

PZX-7

takes multiple measurements per second, and when all the vertical

bars are illuminated, it’s a reference that the same thickness value is reliably
being measured multiple times per second.

E. Battery:

Indicates the amount of battery life the

PZX-7

has remaining.

Содержание PZX-7




















































Результаты поиска

Содержание PZX-7

Отзывы:

Похожие инструкции для PZX-7

Бренды по названию

Популярные бренды

DAKOTA ULTRASONICS PZX-7, Руководство по эксплуатации

Результаты поиска

Содержание PZX-7

Отзывы:

Похожие инструкции для PZX-7

Бренды по названию

Популярные бренды