background image

 

 

 

MAN# 650113D

 

TROUBLESHOOTING (continued) 

PROBLEM 

CAUSE 

SOLUTION 

Custom gauge setup 
displays “Err” and 
returns to “Snd” setup 
option 

Not enough points used 
 
Points not input in correct order 
 
Point entered twice 

Make sure that at least 4 points of gauge are set 
 
Set gauge points in order from cold points to hot points 
 
Each point set must be different that the point before it 

 

 

SERVICE AND REPAIR 

DAKOTA DIGITAL offers complete service and repair of its product line.  In addition, technical consultation is available to help you work through any questions or 

problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems. 

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization 
number.

  Package the product in a good quality box along with plenty of packing material.  Ship the product by UPS or insured Parcel Post.  Be sure to include the RMA 

number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number 
where you can be reached during the day.  Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase.  Send no money.  We will 
bill you after repair.   

 

Dakota Digital 24 Month Warranty

 

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or 

workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital’s option.  

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product.  This Warranty does not 

apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or 
accident. 

This Warranty is in lieu of all other expressed warranties or liabilities.  Any implied warranties, including any implied warranty of merchantability, shall be limited to 

the duration of this written warranty.  Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24 
months from date of original purchase.  No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with 
the sale of this product. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

  

     4510 W. 61ST St. N.,  Sioux Falls, SD  57107 

   Phone: (605) 332-6513      FAX: (605) 339-4106  

 

       
 

 ©Copyright 2007 Dakota Digital Inc. 

 

Содержание PAC-2000







Отзывы: