background image

 

 

MAN# 650052 

10 

Technical specifications 

 
Minimum operating voltage 

7 volts 

Maximum operating voltage 

18 volts 

 

(operating at or near maximum rating for an extended time can damage unit) 

 

 

 

with sender 

SEN-03-1 

SEN-03-5 

Maximum pressure reading 

150 psi   

400 psi 

Gauge Resolution 

 

1 psi 

 

2 psi 

Accuracy  (lower 2/3) 

 

4 psi     

8 psi 

(gauge and sender combined) 

Accuracy  (upper 1/3) 

 

8 psi     

16 psi  (gauge and sender combined) 

Typical current draw (@ 13.8V)  - 

0.25 A 

 

 
 

SERVICE AND REPAIR 

DAKOTA DIGITAL offers complete service and repair of its product line.  In addition, technical consultation is available to help you work through any 

questions or problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most 
problems. 

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise 
Authorization number.

  Package the product in a good quality box along with plenty of packing material.  Ship the product by UPS or insured Parcel Post.  Be sure 

to include the RMA number on the package, and include a complete description of the problem with RMA number, your full name and address (street address 
preferred), and a telephone number where you can be reached during the day.  Any returns for warranty work must include a copy of the dated sales receipt from 
your place of purchase.  Send no money.  We will bill you after repair.   

 

Dakota Digital 24 Month Warranty

 

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in 

material or workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital’s option.  

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product.  This Warranty 

does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, 
neglect, or accident. 

This Warranty is in lieu of all other expressed warranties or liabilities.  Any implied warranties, including any implied warranty of merchantability, shall be 

limited to the duration of this written warranty.  Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought 
within a period of 24 months from date of original purchase.  No person or representative is authorized to assume, for Dakota Digital, any liability other than 
expressed herein in connection with the sale of this product. 

 

 
 
 
 
 

  

     4510 W. 61ST St. N.,  Sioux Falls, SD  57107 

   Phone: (605) 332-6513      FAX: (605) 339-4106  

 

       
 

 ©Copyright 2005 Dakota Digital Inc. 

 

Содержание ODYR-24-1











Отзывы: