7
MAN# 650665:A
System features
INDICATORS
LOCATIONS
There are two message locations available to display additional information under the speedometer. They are labeled Top
and Bottom Message Location, respectively. You can program what you want in each location as well as turn readings off.
Each location can have multiple readings assigned to it; simply tap the function switch to scroll to the next reading in that
location. See function switch operation on page 8.
The main speedometer reading ranges from 0-250MPH/400km/H while the arching bar graph tachometer offers a 0-7000
RPM reading.
Information readings
Description
ODOMETER
Odometer reading (0-999,999)
TRIP A
Trip A odometer reading (0-9999.9)
TRIP B
Trip B odometer reading (0-9999.9)
SERVICE (when enabled)
Distance to next service (0-7500.0 or ---- when “SERVICE DUE”)
TRIP HR
Hours gauge has been on with engine running HH:MM (00:00 to 99:59)
SPEED km/h
Alternate speed unit conversion
RPM
Digital RPM reading (0-9,999)
OIL TEMP (with optional sender present)
Engine oil temperature
OIL PSI (with optional sender present)
Engine oil pressure
VOLTS
System voltage
GEAR/CLOCK
Gear position and 12 hour clock display
Performance readings
HIGH MPH
High speed recall
0-60 TIME
0-60 mph time in seconds
Quarter mile speed/time
Speed at end of ¼ mile (trap speed) and ¼ mile time from standing start
HIGH RPM
High RPM recall
MBM (Motorcycle Bus interface Module)
MBM displays (optional)
Readings for connected modules
Cruise control
(green/red)
Right turn
(green)
Neutral
(green)
High beam
(blue)
Left turn
(green)
Low oil
(red)
Security
(red)
Check engine
(red)
