background image

 

 

 

 

MAN# 650272:C 

Troubleshooting guide.

 

 

Problem 

 

 

Possible cause 

 

Solution

 

 

 

 

 

 

 

Gauge will not light up   

Red wire does not have   

Connect to a location that has power. 

 

 

 

 

  power. 

 

 

 

 

Black wire is not getting  

Connect ground to a different location. 

 

 

 

 

  a good ground. 

 

 

 

 

Gauge is damaged. 

 

Return gauge for repair.  

 

 

 

 

Gauge lights up, but displays 

Speed calibration is invalid 

Gauge must be recalibrated. 

 



”   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gauge lights up, but speed 

Harness is not connected  

Check connection from speed harness to speed 

  will only show zero. 

 

  properly. 

 

 

  sensor and gauge. 

 

 

 

 

Speed sensor not grounded  

Move ground to different location, preferably close to 

properly. 

 the speedometer ground. 

 

 

 

 

Sensor is not sending a speed  See speed sensor voltage checks listed below. 

 

 

 

 

  signal.  

 

 

   

 

 

 

 

Gauge is not calibrated   

Gauge must be calibrated, see instructions on page 2. 

 

Speed reading is erratic or 

Speed sensor wire is loose 

Check all wire connections and cables for breaks. 

  jumps around.  

 

  or broken. 

 

 

   

 

 

 

 

Poor ground connection. 

Check ground on speedometer and sensor. 

 

 

 

 

Poor power connection.  

Check that power is not connected to a noisy source 

 

 

 

 

 

 

 

 

  such as ignition coil power. 

 

 

 

 

Speed reading is incorrect. 

Gauge is not calibrated   

Gauge must be calibrated. 

 

 

 

 

  correctly. 

 

 

 

 

 

 

 

 

 

 

 

SERVICE AND REPAIR 

DAKOTA DIGITAL offers complete service and repair of its product line.  In addition, technical consultation is available to help you work through any questions or 

problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems. 

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization 
number.

  Package the product in a good quality box along with plenty of packing material.  Ship the product by UPS or insured Parcel Post.  Be sure to include the RMA number 

on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number where you 
can be reached during the day.  Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase.  Send no money.  We will bill you after 
repair.   

 

Dakota Digital 24 Month Warranty

 

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or 

workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, s

uch defect(s) will be repaired or replaced at Dakota Digital’s option.  

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product.  This Warranty does not 

apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident. 

This Warranty is in lieu of all other expressed warranties or liabilities.  Any implied warranties, including any implied warranty of merchantability, shall be limited to 

the duration of this written warranty.  Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24 
months from date of original purchase.  No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the 
sale of this product. 

 
 
 
 
 
 
 
 
 
 
 
 

WARNING:

 This product can expose you to chemicals including lead, which is known to the State of 

California to cause cancer and birth defects or other reproductive harm. For more information go to 

www.P65Warnings.ca.gov

 

 

 

Содержание BD-140

Страница 1: ...into the cup and replace the screw into the bottom of the cup Reinstall the cup onto the handle bars Note On some models with tank mounted speedometer it may be necessary to trim the mounting studs on the back of the gauge for proper clearance and fit Wiring The three pin plug on the back of the gauge mates into the factory speedometer wiring harness Simply unplug the stock gauge and plug in the n...

Страница 2: ...the key on and starting the bike once the bike is running release the switch This avoids any problems with the battery voltage dropping during engine cranking There are two methods for calibrating the speedometer auto cal and adjust Either one can be used Auto cal requires that you have one measured mile marked out km for metric this is the best method to start with if your speedometer needs a lot...

Страница 3: ... readings can be turned on or off When they are turned off the odometer will only toggle through the mileage readings Press and release the switch until is displayed then press and hold the switch until is displayed Release the switch The current setting will be displayed or Press and release the switch until the desired setting is displayed Press and hold the switch until is displayed Odometer pr...

Страница 4: ...a good quality box along with plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include the RMA number on the package and include a complete description of the problem with RMA number your full name and address street address preferred and a telephone number where you can be reached during the day Any returns for warranty work must include a copy of the dated sal...

Отзывы: