Note: The transmitters and receivers
are preset at the factory. DO NOT
change settings, unless changing the
tune or experiencing false signals.
Coding the transmitter:
1. Open the bottom section of the transmitter (as shown in figure 1)
2. Locate the 10 dip switches in the transmitter (figure 2).
3. The first eight dip switches are for the frequency setting (256 combinations).
Set switches 1-8 to match the eight switches in the receiver.
4. Switches 9-10 are for the zone/channel setting on the transmitter. The four
zones are as follows:
4.
Switch
9
Switch
10
Channel
12-volt
DC output
Tune
On
On
1
Yes
Classical
Off
On
2
No
Westminster
On
Off
3
No
Ding Dong
Off
Off
4
No
Whistle
