If you are getting false signals:
• Make sure there are no tree branches or other obstructions that may be
periodically blocking the beams.
• If the signal is occurring every 20 seconds (5 minutes), this indicates that
the beams are either misaligned or there is something continuously
blocking the beams.
• You may receive false signals during extreme rain, snow, or fog.
• If the false signals are occuring every 20 seconds (5 minutes) the battery
may be dead in the B unit. Manually charge the B unit via USB micro for
several hours, then turn on the B unit by pressing the power button.
If you are getting no signals:
• Make sure both the A and B units are powered on.
• Make sure the beams are coded to your receiver.
• Make sure the beams are charged. You may need to manually charge with
a USB Micro charger.
• Move the beams closer to your receiver.
• Keep the A sensor away from large metal objects that may interfere with
the radio signal.
Specifications:
• Power source: 18650 rechargeable lithium battery, solar charger or USB
Micro (not included).
• Frequency: 433.92 MHz
• Wireless range: up to 1 mile*
• Maximum detection range: Up to 300 feet.*
• Operating temperature: -20 to 120F.
*Actual range will vary depending on local terrain and obstructions.
Tech Support:
If you have any troubles using this product after reading the manual, please
contact us. You can reach us by phone at 605-356-2772 from 8:30 Am to 5:00
PM Monday through Friday (Central Standard Time). We will be happy to
answer any questions and help in any way we can.
TROUBLE SHOOTING:
Safety information:
• Only use this product for the detection of moving objects such as people
or vehicles.
• Do not disassemble or attempt to repair the product.
• Do not install this unit with any other infrared detectors as this may cause
false signals.
• Do clean and inspect the beams regularly for proper use. If any trouble is
found, please contact Dakota Alert, Inc.
