6.
Figure 5
48
o
Figure 6
Swivel mount
Swivel Mount
The IR-3000 has a swivel mount (figure 6) which also provides for
adjustment of the detection area. The mount can be adjusted
right or left up to 80
o
and up or down up to 50
o
. The swivel mount
can be attached to the desired surface with the provided mount-
ing screws. The sensor is then attached to the mount using the
notch on the back (figure 6).
NOTE:
The mount will slide easily into the slot and lock into posi-
tion one way only. If the mount does not slide into the slot, do
not force it. Rotate the swivel joint 180 degrees and then slide the
mount into position.
