Dakota Alert CAD-03 Kit GSM Скачать руководство пользователя страница 13

Страница: 13 / 16

IMPORTANT: SIM Card

Most pay-as-you-go SIM cards will need to be topped up during the first 3 months of use.

If you do not carry this out, some service providers switch off the SIM card. We recommend

that you alarm the unit as a test every four weeks, just to be sure the SIM card is still

operating.
If the SIM card is pin protected, you will have to enter the pin number when you first power

the system up. You will have to enter the correct pin number within 3 attempts, otherwise

the SIM card will lock out and you will need to request a PUK number from your service

provider.
Please contact SIM card service provider (AT&T, T-Mobile, RebelFone, O

Wireless, etc.) with

questions reguarding SIM cards. Services may be limited by your local provider. Please

contact them reguarding local limitations.

HOw TO ReSeT THe AUTO DIAleR

Inside the battery compartment:

Remove the power supply and the Auto Dialer from the wall. Remove the 7.2V battery. Then

remove the SIM card. Inside the battery compartment is a switch. Move it to the ERASE

position. Connect the power to the Auto Dialer then press DELETE twice. There will be 2

short beeps from the Auto Dialer. Switch the power off again. Replace the SIM card, place

switch back to NORMAL. Replace the 7.2V battery and place back onto the wall. Power the

Auto Dialer back up. The Auto Dialer will then return to factory default setting.

CAD-03 Kit Manual.indd 13

10/15/2009 10:16:02 AM

Содержание CAD-03 Kit GSM

















Результаты поиска

Содержание CAD-03 Kit GSM

Отзывы:

Похожие инструкции для CAD-03 Kit GSM

Бренды по названию

Популярные бренды

Dakota Alert CAD-03 Kit GSM, Руководство пользователя

Результаты поиска

Содержание CAD-03 Kit GSM

Отзывы:

Похожие инструкции для CAD-03 Kit GSM

Бренды по названию

Популярные бренды