Si001423E
Fan Motor
Removal Procedure
7
2. Fan Motor
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
Disconnect the
connector [S70] and
pull out the clamp.
[S70]: fan motor
When reassembling, insert
the clamp into the hole.
2
Release the fan motor
lead wire from the
groove and the 4
hooks.
3
Cut the 2 clamps.
4
Remove the 2 lower
screws.
Be sure to remove the lower
screws (1) first. If the top
screws (2) are removed first,
the fan motor may tilt down
or fall and cause injury
because its center of gravity
is shifted to the front.
5
Remove the 2 upper
screws.
6
Remove the fan motor.
When reassembling, make
sure that the wire harness is
at the bottom.
[S70]
Clamp
(R21762)
(R21815)
Hook
Groove
Clamp
(R21763)
Fan motor
lead wire
(2)
(1)
(R6442)
Fan motor
(R6443)
Harness
(R6444)