Si001423E
Compressor
Removal Procedure
19
2
Disconnect the lead
wires of the compressor
and overload protector.
3
Remove the protection
bushing.
4
Pull out the clamp and
remove the compressor
lead wire.
5
Heat up the blazed part
of the discharge side
pipe and disconnect it.
6
Heat up the brazed part
of the suction side pipe
and disconnect it.
7
Remove the 3 nuts.
8
Lift up and remove the
compressor.
Step
Procedure
Points
Overload
protector
V (yellow)
U (red)
W (blue)
(R21797)
Protection
bushing
(R21798)
Clamp
Compressor
lead wire
Blazed part of
the discharge
side pipe
Blazed part of
the suction
side pipe
(R21799)
