Daken D30SS,D60BS,D98BS, Руководство пользователя

Страница: 15 / 40

DAKEN SPRAYERS
ASSEMBLY [continued]
STEP TEN: CONNECT REMOTE SWITCH TO VEHICLE BATTERY
Batteries are hazardous because they contain caustic acid, can emit explosive gases, and can cause electric
shock.
Caution must be exercised when making connections to a battery to avoid shock and contact with the acid,
and to prevent any sparking that could lead to an explosion.
ALWAYS follow the safety instructions and steps listed below in exact sequence when connecting the
sprayer’s remote switch to the battery terminals.
!
WARNING
1. Preparatory
safety Preparatory safety steps:
• ALWAYS use eye protection
• NEVER smoke or work near sparks or other sources of ignition.
• NEVER touch both battery terminals at the same time or with any non-insulated tools.
• If battery acid contacts skin or clothing, flush immediately with water and neutralize with baking
soda.
2. Connect remote
switch to battery Connect the sprayer’s remote switch to the vehicle battery using the following procedure:
a) Disconnect the vehicle battery ground wire.
b) Connect the remote switch’s red battery clamp to the positive (+) terminal of the battery.
c) Connect the remote switch’s black battery clamp to the negative (-) terminal of the battery.
d) Reconnect the vehicle battery ground wire.
WARNING: Always connect in this sequence to avoid possible shock.
3. Connect remote
switch to pump
power cord
Connect the remote switch to the pump power cord:
Note: Make sure the power switch is in the OFF position on the remote switch
Remote switch
Pump power cord
4. Verify
connection Verify a complete connection has been made by checking with a DC voltmeter, or by briefly turning
the remote switch to the ON position and listening for pump activation.
5. Attach sprayer
to vehicle if you
haven’t yet If you have not yet mounted the sprayer to your vehicle, do so at this time following the
instructions in “Step Nine: Attach Sprayer to Vehicle” .
- 15 -