4/29/03
Model Trademaster
Section I -
6
TRADEMASTER ADJUSTMENTS
A
WHEEL CANT ADJUSTMENT– Used to position blade on wheel.
B
GUIDE BAR LOCK – Used to lock roll guides into position.
C
BLADE TENSION HANDLE – Used to remove and install saw blade. Also used
to set the correct blade tension – be sure blade is tight.
D
ROCKER LOCK KNOB – Used to unlock & move table to desired degree angle
of cut then lock into position.
E
TABLE LOCK KNOB – Used to lock table into a fixed position.
F
VARIABLE SPEED LOCK – Unlock lock and move to the desired blade speed &
relock.
H
HYDRAULIC FEED CYLINDER – Used to regulate the table feed.
A
B
C
E
D
H
G
F
