Dake Atmos, Инструкция по установке, использованию и обслуживанию

Страница: 18 / 24

18
Connect the previously disconnected motor cable
(fig.14A) and the power supply cable.
Fasten the frame to the upper part of the hood
using n. 4 screws (fig. 4).
SLT958 BRHM
BUILT IN - SUCKING VERSION
INSTALLATION
Take the product out of the packaging and place
it on a suitable surface: we suggest to use a soft
ma terial, such as a sponge or a cloth.
Open the glass panel, rotating it as shown in Fig.
1.
IN CASE THE HOOD COMES WITH A GLASS
PANEL BEFORE INSTALLATION , IN ORDER
TO AVOID ANY POSSIBLE DAMAGE TO THE
GLASSES, WE RECOMMEND TO REMOVE
THEM BY UNSCREWING THE EIGHT SCREWS
SHOWN IN FIG.2.
Remove the grease filters (Fig. 3).
A recess shall be created , where the applian-
ce will be placed, which shall have a 865mm X
405mm rectangular opening and depth ran ging
from 200mm to 270 mm.
THE RECESS SHALL BE MADE AFTER IN
STAL LING THE APPLIANCE AND ESPECIALLY
AFTER
CONNECTING THE AIR OUTLET PIPE
The recess shall be provided with a socket and a
round pipe of 150mm diameter, or a similar sec-
tion, for the air outlet.
Drill the holes on the ceiling, as shown in Fig. 17,
in sert the plastic plugs into the holes made, and
then fix the ceiling brackets as shown in Fig. 18.
The ceiling brackets are telescopic, so their
height can be adjusted at 70mm between the cei-
ling and the hood.
If you intend to orient the air outlet of the product,
in a different direction from that established in the
factory, you can dismantle the fan (see fig.19),
acting on the four fixing screws, then rotate and
position it as you want, restore the four fixing
screws removed previously.
Bring the hood close to the brackets previously
fixed and then connect the appliance to the sup-
ply mains.
Secure the hood to the ceiling, by using the
screws supplied, as shown in Fig. 20.