Page
53
of 71
SK2019 FSTD-SLIM-EC-FLEX-001_01
1.
Buttons function
Button
Name
ONOFF
MODE
FAN
SET
DOWN
UP
Function
Switch on or off
the unit
Switch between
modes
Change Fan
Speed
Switch
interfaces
Modify
parameters
Modify
parameters
Press
to change function setting: (CNT stands for pressing times)
（
1
）
CNT=0
：
No function
（
2
）
CNT=1
：
Real time setting
（
3
）
CNT=2
：
Timer On/Off setting
（
4
）
CNT=3
：
Sleep or swing settings
（
5
）
CNT=4
：
Network control (Single control) mode setting
（
6
）
CNT=5
：
Global control
（
7
）
CNT=6
：
Parameters checking
2.
Real time setting
“:” blinks for every second when real time is shown. Press
once to enter Real Time setting interface. When “:” is on,
then press
or
to adjust the current time. Press
to adjust date. Press
to adjust hour or minute.
Press
to confirm settings and exit. If no operation within 6 seconds, it will automatically exit and the setting will not be
saved.
3.
Time On/Off setting
If the master unit is in global control mode and the ON/OFF timer setting is selected, the master unit will command the whole
network to be ON or OFF. Otherwise, the ON/OFF timer affects the local unit only. The system supports ON/OFF timer settings
for each day of the week.
Press
twice to enter Timer setting interface and timer icon is on. When “ON” blinks, press
to set timer date
(from Monday to Sunday). Press
to set hour and minute of timer-on or timer-off alternately. “ON” blinks when timer is
set to on and “OFF” blinks when timer is set to off. Press
or
to set timer on/off time.
Press
to confirm settings and exit. If no operation within 6 seconds, it will automatically exit and the setting will not be
saved. Timer on/off icon is on when timer on/off is set on that day.
4.
Swing or Sleep setting
Press
three times to enter Swing or Sleep setting interface and key lock icon blinks. Press
to turn the sleep
function on or off. Sleep icon is on or off when sleep function is turned on or off.
Press
to turn on or off the swing function.
is on when swing function is on.
Press
to select room sensor in the wall pad or in the unit. If “
∩
” is shown in the area of fan speed display, the senor in
the wall pad is selected. If “F” is shown in the area of fan speed display, the senor in the unit is selected.
Press
to confirm settings and exit. If no operation within 6 seconds, it will automatically exit and the setting will not be
saved.
5.
Temperature setting
Press
or
to set temperature. Set point temperature is shown on temperature display area.
Press
to confirm settings and exit. If no operation within 6 seconds, it will automatically exit and the setting will not be
saved.
When DIP SW1=ON, set point temperature is fixed. In cooling mode, set point temperature is 24
℃
. In heating mode, set point
temperature is 21
℃
.
When DIP SW1=OFF, temperature can be set from 16
℃
to 30
℃
.
When DIP SW2=ON, set point temperature is shown on temperature display area.
