DAITEM 230-21X, Руководство по установке

Страница: 4 / 30

134
GB
1.1 intrusion and fire detector type
applications: terminal block n° 1
• Door and window detector:
using a
normally closed contact (surface
mounted, flush-mounted, wide gap, etc.).
• Roller blind/shutter detector:
using a
specific contact for roller blinds/security
shutters.
• glassbreak detector: using a piezo-
electric type glassbreak sensor.
• motion detector: using a motion sensor
(technology: passive infrared, active
infrared, microwave, etc.)
• Pressure mat.
• fire detector:
using a fire sensor.
1.2 System control type
applications: terminal block n° 1
• Automatic ON/OFF (arming/disarming)
transmitter using a programmable time
clock with voltage free output contacts.
• ON/OFF (arming/disarming) transmitter
using a key switch.
• Panic alarm or silent alarm transmitter
using a contact.
• Fire alarm transmitter using a breakglass
type call point.
1.3 technical detector type
applications: terminal block n° 2
Using a Daitem technical sensor
(household technical detectors operate
around the clock as they do not depend on
whether or not the intrusion protection
system is armed):
• flooding , ref. SONIN: indicates flooding
when water level reaches 2 mm ,
• mains power failure
, ref. SONCS:
indicates a power cut lasting more than
18 minutes + 20% (short power cut) or
more than
5 hours
+ 20% (long power
cut),
• freezer breakdown , ref. SONPC:
indicates temperatures above
-12°c
,
• freezing
, ref. SONHG: indicates
temperatures below +5°c .