30
D004-000017
Supply Power Connection (100-240VAC)
4123 Series User Manual
8.0
Supply Power Connection (100-240VAC)
The end user is responsible for installation of AC power to, or into, the unit, depending on the model.
All cables shall be ATEX approved as applicable. Models requiring cables to be installed, shall enter the
enclosure using cable glands (provided) and installed per applicable industrial standards, as well as local
and national code regulations.
! IMPORTANT !
Review
Section 10.0 Installation and Warnings
before installing or making any connections to the unit.
The Model 4123 Series units accomodates two different ways the customer can supply 100-240VAC power
to the unit. Depending on the connection configuration (Glandplate) required by the customer, control power
can be connected to the units by either:
•
Bayonet-style Quick Connect/disconnect Power Connection
•
Sealcon Cord Grip/Internal Power Connection
8.1
Bayonet-style Quick Connect/disconnect Power Connection
Three of the five Model 4123 Series configurations have a KPT/KPSE 26482-style male power
connector on the glandplate to attach a 100-240VAC power source. They are (Model/Glandplate
No.):
•
Model 4123AC (I640-002325)
•
Model 4123AE (I640-002323)
•
Model 4123AF (I640-002325)
Figure 29 — KPT/KPSE Bayonet-style Power Connector (Male)
