Turn the knob counterclockwise and open
the casing cover holder.
Pull the casing toward you, and then
remove the casing and the inner casing.
Clean the inside of the pump casing and
casing cover with clean water.
7.
PREPARATIONS FOR STORAGE
1. WATER
Drain all water from the drain plug.
(See Fig. 2 -D)
- PLUG (DRAIN)
CAUTION
■
When retightening the drain plug, be
sure to clean the drain plug and the thread
of the casing.
Otherwise, the thread may be damaged.
2. DISCONNECT THE DELIVERY
HOSE
Tilt the pump and drain all water from the
delivery hole. Severe damage to the pump
may occur, if water freezes in the pumping
chamber.
3. DISCHARGE FUEL
Remove the drain screw of the fuel tank.
(See Fig. 3 -D)
WARNING
■
Flames prohibited.
WARNING
■
Do not smoke while discharging fuel.
Otherwise a fire accident may occur.
4. LUBRICATING ENGINE OIL
(See Fig. 3 -A)
Change the used engine oil with fresh oil.
Be sure to put the plug back into the inlet.
5. CLEAN AND STORE
Slowly pull the recoil starter handle until
resistance is felt and leave it in that
position.
Clean the pump thoroughly with an oiled
cloth. Put the cover on and store the pump
indoors in a well ventilated with low
humidity area.
