Dairymaster MOOMONITOR +, Руководство по установке

Страница: 33 / 35

5-5
INM12006 – MOOM V3.0
Copyright Dairymaster 2015
5 Electrical
Pre requisites
Installation procedures
Base Station Wiring
The base station is prewired from
Dairymaster.
The installer on occasion may be
required to replace the PCB or the
LED.
For further
information on
replacing a PCB please contact
Dairymaster.
Figure 33 - Typical View of the Base Station PCB
Important Notes
The customer’s electrical contractor must supply a power connection to the plant
supplied by Dairymaster which is in accordance with the legal and statutory
requirements for the region of installation.
Dairymaster warranties for electrical equipment require a stable power supply.
Always turn off the electrical supply before removing the cover of a control unit
or the cover of the cable joint box on an electric motor or any other electric joint
box. Use a safe means to ensure that the electrical supply is not erroneously
reconnected while a cover is removed. Always replace each cover, with gaskets
properly in place, as soon as possible, but always before the electrical supply is
re-connected.