Dairymaster MOOMONITOR +, Руководство по установке

Страница: 27 / 35

4-20
INM12006 – MOOM V3.0
Copyright Dairymaster 2015
Fitting the Moo Collars to the Cows
The Moo collar comprises of the strap, the collar sleeve, the
retainer/locking ring, the collar weight, and the Moo activity unit.
Fitting of the collar is vital to ensure the Moo is giving accurate readings.
The collar must be a snug fit to ensure that all movements are recorded.
A loose fitting collar may increase the risk of the collar snagging on an obstruction
and/or become a choke hazard.
When fitting the Moo to the cow, thread the collar through the weight to
the midpoint of the collar strap. Thread the locking ring into place over the weight.
Add the buckle on to one side of the weight and the Moo to the opposite
side of the collar strap.
Figure 25 – Typical Moo Activity unit collar
Buckle
MooM
Sleeve
Locking Ring
Weight
Average of 75mm
Important Notes:
Only staff adequately trained in procedures for handling livestock should secure
the MooMonitor to the cows.
Important Note:
Note: Always keep track of the Moo serial number and CowID pairings.
The Moo serial number is located on the rear of the Tag.