Radio type approvals for the tire pres-
sure monitor
Country
Radio type approval number
USA
FCC ID: MRXMW2433A
FCC ID: MRXGG4
FCC ID: MRXMC34MA4
Canada
IC: 2546A-MW2433A
IC: 2546A-GG4
IC: 2546A-MC34MA4
Installing two-way radios and mobile
phones
G
WARNING
The electromagnetic radiation from two-
way radios can interfere with the vehicle
electronics if two-way radios are manip-
ulated or retrofitted incorrectly. This could
jeopardize the operating safety of the
vehicle. There is a risk of an accident.
You should have all work on electrical and
electronic components carried out at a
qualified specialist workshop.
G
WARNING
If you incorrectly operate two-way radios
in the vehicle, the electromagnetic radia-
tion may interfere with the vehicle elec-
tronics, for example if:
R
the two-way radio is not connected to an
exterior antenna
R
the exterior antenna is not correctly
mounted or is not low-reflection
This could jeopardize the operating safety
of the vehicle. There is a risk of an accident.
Have the low-reflection exterior antenna
installed at a qualified specialist work-
shop. Always connect two-way radios to
the low-reflection exterior antenna when
operating in the vehicle.
!
The operating permit may be invalidated
if the instructions for installation and use
of two-way radios are not observed.
In particular, the following conditions
must be complied with:
R
only approved wavebands may be used
R
observe the maximum permissible out-
put in these wavebands
R
only approved antenna positions may be
used
Excessive levels of electromagnetic radia-
tion can cause damage to health. Using an
exterior antenna takes into account current
scientific discussions relating to the possi-
ble health hazards that may result from elec-
tromagnetic fields.
The following antenna positions may be used
for the correct installation of two-way
radios:
:
Front roof area
;
Rear roof area
Use Technical Specification ISO/TS 21609
(Road Vehicles – EMC guidelines for instal-
lation of aftermarket radio frequency trans-
mitting equipment) when retrofitting two-
way radios. Comply with the legal require-
ments for add-on parts.
If your vehicle has installations for two-way
radio equipment, use the power supply and
antenna connections intended for use in the
basic wiring. Be sure to observe the manu-
facturer's additional instructions during
installation.
Deviations with respect to wavebands, max-
imum transmission outputs or antenna posi-
tions must be approved by smart.
i
Damage or consequential damage result-
ing from retrofitting two-way radios in the
190
Installing two-way radios and mobile phones
>>
Technical
data
.
Содержание Smart fortwo cabrio
Страница 194: ...192...